WhatsApp:

87197008

Email Address:

contact@guoyi.com.sg

Tel:+65-93262640

HP:+65-87197008

Home > PRODUCTS > SF6 Oil Testing Equipment > SF6 Test INSTR >

GYQT SF6 gas recovery device

Recommended Products
Product Details
        Technical Specifications:

           Recycle                         Recovery initial pressure≤0.8MPa
                        Recovery final pressure≤50KPa
Recovery time: For a 1 m3 SF6 gas volume with an initial pressure of 0.8 MPa, recovery to a final pressure of 50KPa, recovery time is                                     less than 2.5 hours
          Inflatable For one m3 SF6 gas volume with an initial pressure of 133 Pa, it is charged to 0.8 MPa, and the inflation time is less than 0.8 hours
            Vacuum The ultimate vacuum degree of the device is less than or equal to 10 Pa. The time required to evacuate the 1 m3 SF6 gas volume with an initial pressure of 0.1 MPa to 133 Pa to less than 1.0 hour
            Storage                     Storage container volume 0.05m3
                    Nominal liquid storage capacity 50kg
                    Maximum storage pressure 3.8 MPa
          Purification            After the SF6 gas with a water content of less than
                       1000PPM (volume ratio)
          is recovered and purified by this device at one time:
     Moisture is less than 60PPM (weight ratio), oil is less than
                               10PPM (weight ratio)
      Annual leak rate                                 ≤1% nominal storage
             noise                       ≤75dB (A) sound pressure level
  Working temperature                                     -10 ℃-40 ℃
        power supply           AC three-phase five-wire system 50Hz 400V ± 10%
             power                                            ≤5kW
             weight                                      Approx. 545 kg
Dimensions (L × W × H)                               1450 × 810 × 1200mm3
 
         Product Features:
.1. The built-in phase sequence protector can avoid the worry of the host reversed
      due to the wrong phase sequence at any time
 2. All electrical systems use high-quality brands
 3. High-quality casters will greatly protect the ground paint and reduce the labor required for pushing
 4. The machine is air-cooled, no external water source is needed
 5. The built-in temperature protection system can work normally even at -20 degrees Celsius
 6. The built-in drying and heating system can ensure that the desiccant is saturated and
     can be regenerated by heating and activation of the device, so there is no need to replace the desiccant

  • Email:contact@guoyi.com.sg
  • Address:2 KALLANG AVENUE 08-30 CT HUB SINGAPORE 339407
  • Hotline:0065-93262640

Copyright © 2002-2020 Guoyi Ebuy Pte.Ltd