GYE99 oil chromatography analyzer
GYKLD-B oil contamination level detector
GY-JY automatic insulating oil dielectric strength
GY-JJY automatic insulating oil dielectric strength
GYJS insulating oil dielectric loss and volume resi
GY3201 Automatic Closed Flash Point Tester
GY202 Automatic Tension Tester
GY106 Oil Trace Moisture Analyzer
GY1301 Automatic Kinematic Viscometer
GYSZ Automatic Acid Value Analyzer
Operation display | 192 × 64 dot matrix Chinese LCD |
Temperature controlled area | 6 way |
Temperature control range |
Room temperature + 5 ℃ ~ 400 ℃, increment: 1 ℃, accuracy: ± 0.1 ℃ |
Temperature programming order | 16th |
Lift rate | 0.1 ~ 40 ℃ / min |
Pneumatic control | Mechanical valve control method, electronic pressure flow control method are optional |
External event | 4 way |
Sampler type |
Packed column, capillary tube, six-port valve gas sampling, automatic headspace sampling, etc. are optional |
Number of detectors | 5, FID, TCD, ECD, FPD, NPD (optional) |
Start injection | Manual, automatic optional |
Communication Interface | Ethernet: IEEE802.3 |
Hydrogen flame ioni zation detector (FID) | |
Detection limit | ≤3 × 10-12g / s (n-hexadecane / isooctane) |
Baseline noise | ≤5×10-14A |
Baseline drift | ≤1×10-13A/30min |
Linear range | ≥107 |
Thermal Conductivity Detector (TCD) | |
Sensitivity | S≥10000mV.ml / mg (Benzene / Toluene) (Amplification 1, 2, 4, 8 times optional) |
Number of detectors | 5个,FID、TCD、ECD、FPD、NPD(optional) |
Baseline noise | ≤20μV |
Baseline drift | ≤30μV/30min |
Linear range | ≥105 |
Electronic Capture Detector (ECD) | |
Detection limit | ≤1 × 10-14g / ml (Propyl hexahexadecane / isooctane) |
Baseline noise | ≤0.03mV |
Baseline drift | ≤0.2mV/30min |
Linear range | ≥104 |
Radioactive source | Ni63 |
Detection limit | (S) ≤2 × 10-11g / s, (P) ≤1 × 10-12g / s (methyl parathion / anhydrous ethanol) |
Baseline noise | ≤3×10-13A |
Baseline drift | ≤2×10-12A/30min |
Linear range | for sulfur ≥10, for phosphorus ≥10 |